NEC SL2100 Features And Specifications Manual page 519

ISSUE 1.0
IP Terminal Configuration:
Program Program Name
No.
15-01-01 Basic Extension Data Setup - Extension Name
15-05-02 IP Telephone Terminal Basic Data Setup - IP
Phone Fixed Port Assignment
15-05-07 IP Telephone Terminal Basic Data Setup - Using
IP Address
15-05-16 IP Telephone Terminal Basic Data Setup - Au-
thentication Password
15-05-18 IP Telephone Terminal Basic Data Setup - IP Du-
plication Allowed Mode
15-05-40 IP Telephone Terminal Basic Data Setup - Calling
name display info via trunk for standard SIP
15-05-43 IP Telephone Terminal Basic Data Setup - Video
Mode
15-05-49 IP Telephone Terminal Basic Data Setup - Re-
ceiving SIP INFO
Out of Range Notification:
Program Program Name
No.
24-02-03 System Options for Transfer - Delayed Call For-
warding Time
24-02-15 System Options for Transfer - SIP Out of Range
Timer
24-09-01 Call Forward Split Settings -
Call Forwarding Type
24-09-02 Call Forward Split Settings -
CO Call Forwarding Destination for Both Ring,
All Call, No Answer
24-09-03 Call Forward Split Settings -
Intercom Call Forwarding Destination for Both
ring, All Call, No Answer
Features and Specifications Manual
Input Data
Up to 12 Characters
MAC address
00-00-00-00-00-00 ~ FF-FF-FF-
FF-FF-FF
Read Only:
0.0.0.0 ~
255.255.255.255
Up to 24 characters
0 = Disable
1 = Enable
0 = Both name and number
1 = Name only
2 = Number only
3 = None
0 = Disable
1 = Enable
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is not
available
Input Data
0 ~ 64800 seconds
0 ~ 30 seconds
0 = Call Forwarding Off
1 = Call Forwarding with Both
Ringing
2 = Call Forward when No An-
swer
3 = Call Forwarding All Calls
4 = Call Forwarding when Busy
or Not Answered
5 = Call Forwarding when Busy
Maximum of 36 digits (0 ~ 9, * ,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 36 digits (0 ~ 9, ,
*
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
SL2100
Default
No Setting
00-00-00-00-00-00
Refer to the Program-
ming Manual for the
default values.
No Setting
0
0
0
1
Default
10
4
0
No Setting
No Setting
1-505
I