NEC SL2100 Features And Specifications Manual page 353

ISSUE 1.0
Program Program Name
No.
11-11-16 Service Code Setup (for Setup/Entry Operation) -
Force Ringing of Incoming Intercom Calls
11-12-06 Service Code Setup (for Service Access) -
Switching of Voice Call and Signal Call
15-02-16 Multiline Telephone Basic Data Setup - Hands-
free Operation
20-02-12 System Options for Multiline Telephones -
Forced Intercom Ring (ICM Call Type)
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-08-10 Class of Service Options (Outgoing Call Service)
- Signal/Voice Call
20-09-05 Class of Service Options (Incoming Call Service)
- Signal/Voice Call
Operation
To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle Speaker key.
2. Dial 721.
3. Press Speaker key to hang up.
This disables Forced Intercom Ringing.
To enable Forced Intercom Ringing for your incoming Intercom calls:
1. Press idle Speaker key.
2. Dial 723.
3. Press Speaker key to hang up.
This disables Handsfree Answerback.
To change the way your Intercom call signals the extension you are calling:
1. Dial 1.
If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination. This
option is also available at Single Line Terminals.
Features and Specifications Manual
Input Data
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 8 digit
*
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Voice)
1 = Enable (Signal)
1 ~ 15
0 = Off
1 = On
0 = Off
1 = On
SL2100
Default
723
712
1
1
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
1-339
H