NEC SL2100 Features And Specifications Manual page 676

SL2100
Programmable Function Key Can Toggle Night Modes
The software allows a Night Service Programmable Function Key (PRG 15-07-01 or SC 751: 09 + 0)
to toggle night modes. You can determine in programming (PRG 12-08-01) how many modes through
which the user toggles. Note that the additional data for the Programmable Function Key must be set
to 0 for the toggle function to work. The toggle key will only act as a toggle key if command PRG
20-01-17 is set to toggle (by default) .PRG 20-01-17 is set to Skip and the key will act as a Night Mode
skip for own group key.
Night-mode skip for own Group
The software allows own group operation mode to skip next mode manually. Order of skip follows
setting of PRG 12-02, Automatic Night Service Patterns, if current mode is Day and next mode is
scheduled to Rest, Skip key operation changes current mode to Rest manually. There are two method
provided for Skip operation.
N
1. Use Service Code 787 (default)
2. Use Night Service Programmable Function Key (PRG 15-07-01: 09+0) under the condition of
PRG 20-01-17, Day/Night change key mode set 1 (skip).
Conditions
• Almost all features are affected by Night Mode except for the following:
- Dial Tone Detection
- External Alarm Sensors
- Flexible System Numbering
- Pulse to Tone conversion
- SMDR
- Volume Control
• Call Arrival (CAR) keys and Virtual Extension keys do not support Day/Night Mode (09)
Programmable Function keys.
• Universal Night Answer will only work when call is sent to a ring group.
• There are separate Access Map and Ring Group programming entries for each Night Service mode
(modes 1~8). Also, Universal Answer allows an extension user to pick up a Universal Night Answer
(UNA) call.
• Mode Keys can be assigned as required for DSS Consoles.
• With Universal Night Answer, outside calls can ring External Paging Zones.
• Programmable Function Keys simplify activating Night Service.
• When programming Night Service function keys, multiple keys must be used for switching between
each Night Service Mode.
Default Settings
System is always in the Mode 1
System Availability
Terminals
Not Applicable
Required Component(s)
None
1-662
ISSUE 1.0
Night Service