NEC SL2100 Features And Specifications Manual page 37

ISSUE 1.0
Program Program Name
No.
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
21-01-04 System Options for Outgoing Calls - Dial Tone
Detection Time
35-05-02 Account Code Setup - Forced Account Code Toll
Call Setup
35-06-01 Verified Account Code Table - Verified Account
Code
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for
incoming calls. This procedure is not available for Single Line Terminals.
1. Dial .
*
- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows an
3. Dial .
*
- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting
the system prompts you for your Account Code. You may also use this procedure if your system has
Optional Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
Press a line key or dial a code to access a trunk. Refer to
for more information.
2. Dial .
*
- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and #).
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes
are hidden, each digit you dial shows an
Features and Specifications Manual
Input Data
50 = Account Code
1 ~ 15
0 ~ 64800 seconds
0 = Account Codes for ALL calls
1 = Account Codes for TOLL
calls
1 ~ 9, 0, #, @ (@ = Wild card)
(Up to 16 digits)
on the telephone display.
*
Central Office Calls, Placing on page 1-174
on the telephone display.
*
SL2100
Default
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Extension 101 is Class
15 and other Extension
are Class 1
5
0
No Setting
1-23
A