NEC SL2100 Features And Specifications Manual page 68

SL2100
type for the intercom call they place to either a voice announce or ringing call to an extension in a
networked system.
Operation
To place an Intercom call:
1. At a Multiline Terminal, press Speaker key or Lift the Handset.
- OR -
At a Single Line telephone, lift the handset.
2. Dial the extension number (or 0 for the operator).
Your call may voice-announce or ring the called extension. Dial 1 on the key pad to toggle back and
A
forth between ring and voice-announce.
Voice Mail, Centralized
Networking will support the use of a single InMail for the entire network. A user may call into the voice
mail from anywhere in the network and perform functions as if the voice mail were located on their
premises.
Operation
To place a Voice Mail call:
1. At a Multiline Terminal, press Speaker key or Lift the Handset.
- OR-
At a Single Line telephone, lift the handset.
2. Dial the pilot number of the Voice Mail (PRG 45-01-07).
Using the above method the caller will not log into their own box. The caller will be prompted to enter
the extension number they wish to use.
For the caller to log directly into the Voice Mail box of the calling extension:
1. At a Multiline Terminal, press Speaker key or Lift the Handset.
- OR -
At a Single Line telephone, lift the handset.
2. Dial the Voice Mail access code of
A multiline telephone user may also:
1. Press the VM Soft Key in the display of the Multiline telephone.
A user may want a line key programmed to indicate if another extension has Voice Mail messages.
When a message is left for the extension, which is programmed under this key, the LED will flash
indicating the user has a Voice Mail Message. This same line key, when pressed, will log the user
directly into the associated mailbox.
To program a Voice Mail key on a Multiline telephone:
1. Press Speaker key.
2. Dial 751 (PRG 11-11-17).
3. Press the key you want to program.
1-54
8 (PRG 11-12-51).
*
ISSUE 1.0
AspireNet