Alarm Reports; Table 1-2 Sample Alarm Report - NEC SL2100 Features And Specifications Manual

Hide thumbs Also See for SL2100:

Table of Contents

The system logs various errors and reports information about the operation that can be used to

determine the cause of a problem. The system can indicate several errors on the Multiline Terminal

display, or be downloaded in PCPro. The report data also can be sent via e-mail.

DSP Resource Full

When attempting a call requiring an IP to TDM conversion and no DSP resource is available, the

system displays a message on Multiline Terminal and can generate an alarm via the Alarm Report.

IP Collision

System is able to detect another device on the same subnet having an IP address that conflicts with

those assigned to the CPU, VoIPDB and DSP resource to make troubleshooting easy when IP

packets are not sent.

Alarm Report

The Alarm Reports indicate:

• System start-up/upgrade date and time.

• Unit communication error with date and time and the restoration date and time.

• Date and time a unit was removed from the system.

• Date and time an extension was disconnected from the system.

• Date and time of any system data change.

<< Alarm Report

Features and Specifications Manual

Installation

Installation

System Start

Installation

CPU-LAN Link

CPU-LAN Link

Installation

Installation

VoIP All DSP

VoIP All DSP

Alarm Reports

05/16/2006 14:30 PAGE 001

Show Quick Links

Table of Contents