NEC SL2100 Features And Specifications Manual page 774

SL2100
To start Room Monitor
1. Press Speaker key + dial 610 + 1 + monitored terminal number, "200" and press Speaker key.
- OR -
Press the Function key (#03) + dial 1 + monitored dial number, "200" , the Function key turn on
Red (slow flash), and press Speaker key.
2. Place incoming call from telephone which number is set at PRG 13-04-01.
3. Room Monitor start at extension 200.
4. By dialing
To stop Room Monitor
1. Press Speaker key + dial 610 + 0 + monitored terminal number, "200".
S
- OR -
Press the red flashing Function key (#03) + dial 0 + monitored dial number, "200".
2. Place outside call from telephone which number is set at PRG 13-04-01.
3. Call ring at extension 200.
Remote Inspection
< Program >
PRG 11-10-49: 619; Auto Dial Setting for Remote
PRG 20-45-01: 200; Remote Inspection terminal, 200
PRG 20-45-02: 12:00; Ringing start time, 12 o'clock noon
PRG 20-45-03: 3; ringing continue time, 3 minutes
PRG 20-45-04: 999; Speed dial bin number, 999
PRG 20-45-05: 1; VRS message number when inspected extension answered, 1
PRG 20-45-06: 2; VRS message number when emergency call destination answered, 2
PRG 20-45-07: 3; Times of auto repeat dial, 3
PRG 20-45-08: 30; Auto dial calling time, 30 sec
PRG 20-45-09: 30; Interval of Auto Dial, 30 sec
Set up Remote Inspection
1. Press Speaker key + dial 619 at Multiline Terminal.
2. Dial Remote Inspection terminal number (1-6).
3. Dial 1 (set).
4. Dial Remote Inspection extension number, "200".
5. Dial Ringing start time, "1200".
6. Dial ringing continue time, "03".
7. Dial Speed dial bin number to use, "999".
8. Dial emergency call destination number "xxx-xxx" and press Hold key.
9. Dial VRS message number when inspected extension answered, "001".
10. After beep tone, record the message and press # key.
11. Dial VRS message number when emergency call destination answered, "002".
12. After confirmation tone, record the message.
13. Press Speaker key and finish recording.
To Cancel the Remote Inspection
1. Press Speaker key + dial 619 at Multiline Terminal.
1-760
from outside it is possible to make both way talk.
*
ISSUE 1.0
Security