Section 7 Using Softkeys For Programming; Section 8 What The Softkey Display Prompts Mean; Table 1-3 Softkey Display Prompts - NEC SL2100 Programming Manual

ISSUE 2.0
Use this keypad digit ...
Flash

Section 7 USING SOFTKEYS FOR PROGRAMMING

(This Feature is available for Digital (2W) Multiline Terminal and IP Multiline Terminal Only.)
Each Display telephone with Softkeys provides interactive Softkeys for intuitive feature access. The
options for these keys will automatically change depending on where you are in the system
programming. Simply press the Softkey located below the option you wish and the display will change
accordingly.
Pressing the Cursor key Up or Down will scroll between the menus.

Section 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN

(This Feature is available for Digital (2W) Multiline Terminal and IP Multiline Terminal Only.)
When using a display telephone in programming mode, various Softkey options are displayed. These
keys will allow you to easily select, scan, or move through the programs.
If you press this Soft-
key ...
back
select
- 1
+ 1
Programming Manual
Clear all the entries from the point of the flashing cursor and to the right.
_
Program Mode
Base Service OP1
_
Program Mode
Hard Mtnance

Table 1-3 Softkey Display Prompts

Softkey Display Prompts
Go back one step in the program display.
You can press Cursor Key (UP) or Cursor Key (Down) to scroll forward or backward through a
list of programs.
Scroll down through the available programs.
Scroll up through the available programs.
Select the currently displayed program.
Move the cursor to the left.
Move the cursor to the right.
Move back through the available program options.
Move forward through the available program options.
When you want to ...
OP2
The system will ...
SL2100
1-5