Elevation Potentiometer Replacement - GE T2100 Service Manual

FRU Replacement
PIN
R2 & R1
W
V
U
L3
L2
L1
NC
Gnd
Gnd

Elevation Potentiometer Replacement

Replace the Elevation Potentiometer Harness on T2100 Treadmills experiencing
elevation hesitation and seeking problems or a faulty T2100 Treadmill stop condition
during an elevation change.
122
Description
White wires going to the resistor. These wires can be inverted.
Blue wire going to the drive motor.
Red wire going to the drive motor.
Black wire going to the drive motor.
Not used.
Black wire going to the L2 terminal on the power board.
Black wire going to the L1 terminal on the power board.
Not used.
Orange-Yellow wire earth/ground going to the motor. Can be inverted with
the other Gnd.
Orange wire earth/ground going to the ground terminal on the power board.
Can be inverted with the other Gnd.
T2100 Treadmill
2021403-120F