GE T2100 Service Manual page 109

3. Loosen the walking belt tension screws on the end of the T2100 Treadmill.
Arrows point to location of tension screws.
4. On the drive-belt side of the T2100 Treadmill, remove the 3 bolts fastening the
walking belt drive gear to the roller.
5. Locate the roller bolt access hole. Remove the 9/16 inch bolt (one of two that
holds the roller in position).
Arrows point to location of roller bolts.
6. While supporting the free end of the roller, remove the 9/16 inch bolt on the
opposite side of the T2100 Treadmill.
7. Remove the drive belt gear.
8. Lift the roller up and slide it out of the belt.
2021403-120F
T2100 Treadmill
FRU Replacement
109