Figure 11-61 Separate Tilt Leg From Leg Support; Figure 11-62 Remove Legs From Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
11 - 82
Tilt Leg

Figure 11-61 Separate Tilt Leg from Leg Support

4. Push the two stopper tabs through the slots to separate the tilt
leg from the leg support.
5. Lay the tilt leg and the leg support flat.
6. Press the two tabs locking the legs to the multiline terminal and
pull the legs toward you, lifting to remove.

Figure 11-62 Remove Legs From Multiline Terminal

7. Disconnect serial connection cord from terminal body. Leave
cord connected to the cradle unit.
UNIVERGE SV8100/SV8300
Installing SV8100/SV8300 Optional Equipment
Stoppers