Issue 1.0
11 - 50
6.
Connect the telephone wiring to the 4-Port Digital
Call Logging Unit. Be sure to note which extension
is connected to which port of the devices (each
device has a unique serial number). In the
Recorder window you will see the serial number
followed by a trailing digit (1 ~ 4), this identifies the
port on the device.
Label each Digital Station Port with the extension it
will be recording. Refer to
Station
Figure 11-36 Digital Station Ports
11.5.6.4
Install the 4-Port Digital Call Logging Unit BackOffice
Software
1.
Insert the NEC BackOffice CD into the CD drive of
the PC.
2.
Locate the Recorder folder.
3.
Click on the Setup.exe file in the Recorder folder.
4.
Select Telephone System-Type.
5.
Select Install Location or Next to choose default
(recommended) location.
6.
Select Finish.
UNIVERGE SV8100/SV8300
Before the telephone wiring is connected, the devices
may temporarily show "Failed" and then reinitialize.
This is normal operation.
Figure 11-36 Digital
Ports.
Choose European if in a territory that uses
A-Law or US for the US and territories that use
Mu-Law.
Installing SV8100/SV8300 Optional Equipment