Figure 7-51 Remove Side Panel From Multiline Terminal; Figure 7-52 Securing The 8Lk-L Unit With Screws - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
7 - 48
3.
4.
5.
6.
7.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Pry the side panel from the multiline terminal.
Side Panel

Figure 7-51 Remove Side Panel from Multiline Terminal

Return the multiline terminal to the buttons side up
position.
Fit the projections on the side of the 8LK-L UNIT
into the guide holes on the side of the multiline
terminal.
Secure the 8LK-L UNIT with the two screws
provided.

Figure 7-52 Securing the 8LK-L UNIT with Screws

Turn the multiline terminal upside down.
UNIVERGE SV8100/SV8300