Figure 4-66 Installing Cover Battery - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
4 - 54
Figure 4-65 Connecting Battery Cables
16. Insert tabs on cover into holes on CHS LARGE BATT BOX.
Slide the cover left until seated and tighten the screw. Refer to
Figure 4-66 Installing Cover
4.2.3 CHS LARGE BATT BOX to CHS2U-US Connection
1. Power down the CHS2U-US chassis.
2. Disconnect AC power cable from rear of chassis.
Battery.

Figure 4-66 Installing Cover Battery

Ensure the CHS2U-US chassis is powered
OFF.
UNIVERGE SV8100/SV8300
Installing the SV8100 Chassis