NEC Univerge SV8100 System Hardware Manual page 166

Issue 1.0
System Tone
(Fixed)
Busy Tone
Call Waiting Tone
Second Dial Tone
Howler Tone
Internal Dial Tone
Internal Ringback Tone
LCR Dial Tone
Reorder Tone
Service Set Tone
Special Dial Tone
Camp-On Tone
Call Alert Notification
Attendant Tone Override
Hold Tone
3 - 32
Table 3-17 Tone Patterns
Frequency (Hz) Intermit
(Fixed) (Default)
0.5 sec On
480/620
0.5 sec Off
1 sec On
440/480
1 sec Off
350/440 Continuous
2500 Modulation
Continuous
(16 Hz)
350/440 Continuous
1 sec On
440/480
3 sec Off
0.2 sec On
0.2 sec Off
440/480
0.2 sec On
1.2 sec Off
0.2 sec On
480/620
0.3 sec Off
440 Continuous
0.1 sec On
350/440
0.1 sec Off
440 Continuous
0.1 sec On
0.6 sec Off
0.1 sec On
480/620
0.1 sec Off
0.1 sec On
2.8 sec Off
6.9.3 Multiline Terminal LED Flash Patterns
The SV8300 system has 2-color LEDs. Green is used primarily for
I-Use conditions and for outside calls. Red is used primarily for Other
Use conditions and internal calls. Refer to
Terminal LED Flash
UNIVERGE SV8100/SV8300
Cycle
0.5 sec
0.5 sec
1 sec
1 sec
1 sec
3 sec
0.2 sec 0.2 sec
0.2 sec
1.2 sec
0.2 sec
0.3 sec
0.1 sec
0.1 sec
0.1 sec 0.1 sec 0.1 sec
0.6 sec 0.1 sec
Pattern.
SV8300 System Specifications
2.8 sec
Table 3-18 Multiline