NEC Univerge SV8100 System Hardware Manual page 343

UNIVERGE SV8100/SV8300
LED Color
S2 Green Status indications on system reset.
Blinking
Status indications of VoIPDB.
Off
On
Blinking
ALM Red Status indications of MJ/MN alarm.
On
Blinking
Off
LINK Green Status indications of link on ETHERNET port.
On
Blinking
Off
100M Green Status indications of data speed on ETHERNET port.
On
Off
CF – Not Used
System Hardware Manual
Table 6-11 CC-CP00 LED Indications (Continued)
Blinking while copying the system data from the flash memory to the
SDRAM/Blinking while downloading the DSP firmware program.
VoIPDB blade is not mounted/Office data is not assigned/VoIP
license is short.
VoIPDB blade is mounted (When the connection is established).
VoIPDB blade is mounted (when sending/receiving a packet).
MJ alarm
MN alarm
Normal status
Link is established
Link is established (When receiving a packet)
Link is not established
100Mbps
10Mbps
Status
Issue 1.0
6 - 31