NEC Univerge SV8100 System Hardware Manual page 339

UNIVERGE SV8100/SV8300
System Hardware Manual
DTG
System Tone Sender
MF Receiver: 64 channels
MF Sender: 64 channels
MF Signal Sender (Sends caller information to CO for E911)
CFT
Call Progress Time Detection
C-Channel Control
Conference: 32 Channels
Caller ID Receiver; 64 Channels
Caller ID Generator; 16 Channels for Analog Stations
A reset switch which is used for initial system startup, resetting the
system, or when upgrading system software
Two Serial Ports (null modem/cross-over cable required)
One USB Port – USB 1.1/2.0 (requires USB driver – download from
NEC web site) Not Used
One Gbit Ethernet Port for VOIPDB
One Fast Ethernet Port (10 Base-T/100 Base-TX)
One CompactFlash Card Slot
Status LED
One EXIFU Interface Connector
One Music On Hold External Source
HDLC Packet Processing
Real Time Clock (tolerance 30 seconds/month)
Internal MOH Generation (supplied from Melody IC)
Call Control Server (ex: Voice Mail Server, SIP Server, RTP
Forwarding, VoCoder Conversion)
One Connector for PAL EPROM
One lithium battery (Sony CR2032 or equivalent) which provides
battery back-up of system data and RAM memory for approximately 30
months
The CC-CP00 functions provided are:
Call Control Server
Voice Mail Server (voice mail requires a compact flash card)
SIP Server
Issue 1.0
6 - 27