Figure 5-40 Pz-Bs10 Expansion Bay In Controlling Chassis; Figure 5-41 Open Base Chassis Cover - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5 - 38
3.5.5.2 Install the PZ-BS10 Expansion Base Blade in the CHS1U-US
Controlling Chassis
1. Ensure the chassis is powered down.
2. Locate the door positioned on the left end (expansion
bay) of the Controlling Chassis (refer to
PZ-BS10 Expansion Bay in Controlling

Figure 5-40 PZ-BS10 Expansion Bay in Controlling Chassis

3. From the left side of the chassis, pull cover outward to
expose the expansion bay.
4. Pull the cover toward you to remove.
UNIVERGE SV8100/SV8300
Do not remove or install this blade
with the power on.
Expansion Bay

Figure 5-41 Open Base Chassis Cover

Installing the SV8300 Chassis
Figure 5-40
Chassis).