Figure 11-44 Installing Adapters - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Using Adapters

The modular terminals can support the installation of one additional adapter

underneath the terminal. These adapters provide the keyset different

capabilities, depending on the adapter installed.

These optional adapters are not installed on non-modular telephones.

Only the ILPA, ADA and PSA Adapters can be used on the IP phones.

ADA – Conversation Recording

APR – Analog Port Adapter with Ringer

PSA – Keyset/IP Phone Power Failure

When installing or removing the adapter,

system. External power is not required for the adapter.

Telephones with any adapters installed require an optional wall mount unit

(WM-L) to be wall mounted. The bracket does not accommodate the

In-line Power Adapter (ILPA-R)

The In-Line Power Adapter (ILPA-R), which is IEEE 802.3af compliant,

detects power from a PoE-compatible ethernet switch and passes it to the IP

terminal. The ILPA does the negotiation and detection with the switch and

then relays the power to the IP terminal device. This provides an additional

way to power the NEC IP terminals. With this adapter, the IP terminals on the

UNIVERGE SV8100/SV8300 system can be powered using:

Local power connecting the IP terminal to a local AC wall outlet using the

AC-R Adapter

Figure 11-44 Installing Adapters

the keyset should first be unplugged

Installing SV8100/SV8300 Optional Equipment

UNIVERGE SV8100/SV8300

Show Quick Links

Table of Contents

Univerge sv8300