Huawei NetCol5000-C030H90D0 User Manual page 106

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual (2019)
No.
3
4
5
6
----End
Follow-up Procedure
After you have completed the settings, perform the following checks to confirm
whether the teamwork control is available:
1.
Issue 03 (2020-08-30)
Parameters Note
Active/ Active: properly responds to the requirement control.
Standby
Standby: responds to the requirement control when active
one is faulty (critical alarms, shutdown, and offline) or
cannot meet cooling requirements.
M/S M indicates the master unit, and S indicates a slave unit.
Blue indicates that the device is operating, and gray
indicates that the device is idle.
Frame: A device with green frame indicates the device itself,
green/non-
green
as shown in
A non-green frame indicates the other device in the group,
as shown in
Ground Red indicates that a critical alarm is generated,
color: red,
bright gray
as shown in
Bright gray indicates that the device is operating without
any critical alarms,
as shown in
NO TE
If teamwork succeeds, the teamwork icon is green. If teamwork fails, the teamwork icon is
red. If teamwork mode is disabled, the teamwork icon is gray.
Check whether the device number on the topology is the same as the actual
device number.
– If yes, go to 2.
Copyright © Huawei Technologies Co., Ltd.
.
.
.
.
4 Commissioning
98