Toro 07068 Operator's Manual page 15

4. Secure the other end of the chain to the slot in the
frame with the snap link
Note: There should be some slack in the chain when
connected.
5. Grease the fitting on the blade mounting assembly and
on the windrow blade hub with No. 2 lithium grease.
1. Bolt (7/16 x 3-3/4 inches)
2. Small washer (1/2 inch)
3. Sweeper frame
4. Large washer
5. Blade-mount assembly
6. Lock nut (7/16 inch)
7. Bolt (7/16 x 3-1/4 inches)
(Figure 15).
Note: When the windrow is not required, unhook the
chain from the snap link, pivot the windrow assembly
upward, and hook the chain at the raised level.
Figure 15
8. Windrow blade
9. Spacer
10. Bolt (3/8 x 1-1/4 inches)
11. Chain
12. Flange nut (3/8 inch)
13. Snap link
15