Verifying The Ieee C37.118/1344 Udp Communication - ABB Relion 670 Series Commissioning Manual

1MRK 511 403-UEN E
IEC140000144 V1 EN-US
Figure 16: Captured synchrophasor data
9.5.2

Verifying the IEEE C37.118/1344 UDP communication

After setting both PMU configuration and the UDP client configuration (As explained in
sections
communication (PMU configuration)
making sure that the Ethernet communication is set up, click
Tester tool.
IEC140000145 V1 EN-US
Figure 17:
• Now it should be possible to see the streaming synchrophasor data.
• Verify the communication by following the same steps as in section
C37.118/1344 TCP
Bay control REC670
Commissioning manual
Setting the PMU station communication (PMU
Verifying the UDP communication using PMU Connection Tester
communication.
© Copyright 2017 ABB. All rights reserved
Establishing connection and verifying the IEEE C37.118/1344 communication
Report),
and Setting the TCP/UDP client
GUID-F0D1117D-3D0F-498F-A00C-242763F8A4E6 v1
Setting the PMU station
communication) and
Connect on the PMU Connection
IEC140000145-1-en.vsd
Verifying the IEEE
Section 9
77