Premaintenance Procedures; Opening The Front Hood; Opening The Rear Hood - Toro 2024 Operator's Manual

Directional drill
Hide thumbs Also See for 2024:
Table of Contents

Advertisement

CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.
WARNING
Improperly servicing or repairing the machine may cause injury or death.
If you do not understand the service procedures for this machine, contact your dealer or see the service
manual for this machine.
WARNING
Raised equipment on the machine without an operator may cause injury or death.
Before you leave the operator's compartment, support or lower the equipment and stop the engine.
WARNING
Replace all covers and guards after you service or clean the machine. Do not operate the machine without
the covers or guards in place.
Premaintenance
Procedures

Opening the Front Hood

1. Park the machine on a level surface, stop the engine,
and remove the ignition key.
2. Push down on the hood latch as shown in
Figure 58
1. Hood latch
3. Lift up on the handle as shown in
Figure
58.
1. Hood handle

Opening the Rear Hood

1. Park the machine on a level surface, stop the engine,
and remove the ignition key.
58
Figure
59.
Figure 59

Advertisement

Table of Contents
loading

This manual is also suitable for:

23800a23800c23800te23800w

Table of Contents