Table of Contents
Advertisement
125-6125
1. Warning—read the
Operator's Manual.
2. Explosion hazard;
electrical shock
hazard—do not dig before
calling local services.
3. Press to apply tread-joint
compound.
4. Press and hold for
maximum drilling fluid
pressure; release to stop
the flow.
5. Press to turn the
drilling-fluid pump on
or off.
6. Press and hold to move
the drill carriage at high
speed up or down the drill
frame.
7. Mode I—spin drill spindle
clockwise. Mode II—left
trigger pressed, open the
lower wrench; left trigger
released, raise the pipe
elevator.
8. Mode I—spin drill spindle
counterclockwise. Mode
II—left trigger pressed,
close the lower wrench;
left trigger released, lower
the pipe elevator.
9. Thrust the drill carriage
forward.
10. Pull the drill carriage
rearward.
1. Entanglement hazard—keep away from moving parts.
1. Cutting/dismemberment hazard, fan—keep away from
moving parts.
1. High pressure fluid hazard, injection into the body—read
the Operator's Manual before performing maintenance.
14
125-6126
125-6127
125-6128
Advertisement
Table of Contents
