Toro DD4045 Software Manual

4045 Directional Drill with Cab
Software Versions A–L
Model No. 23823/A/C/TE/W—Serial No. 315000001 and Up
Model No. 23825/A/C/TE/W—Serial No. 315000001 and Up
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Main Operating Screen
To access this screen, push button 4 or the down
arrow on the Machine Information Screen (page
The main operating screen displays the engine-speed
(rpm) gauge, the fuel-quantity gauge, the
engine-temperature gauge, the pipe-row selector,
thrust control, and horsepower control
The low-fuel indicator lights up on the main-operating
screen when the machine is running low on fuel
(Figure 1).
Push button 3 to select the thrust control
Push button 4 to select the horsepower control
1).
Push button 7 to sound the horn
Push button 8 for the pipe-row selector
Note:
The horn option (button 7) is only for software
versions K and up.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
6).
(Figure 1).
(Figure 1).
(Figure
(Figure 1).
(Figure 1).
Register at www.Toro.com.
Figure 1
Main Operating Screen
1. Fuel gauge
2. Engine-speed (rpm) gauge 6. Thrust control
3. Coolant-temperature
gauge
4. Pipe-row selector
Original Instructions (EN) All Rights Reserved *3416-942* A
Printed in the USA
Form No. 3416-942 Rev A
Software Guide
5. Horn control
7. Horsepower control
g029896