Lubrication; Greasing The Machine - Toro TX 1000 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease.
1. Park the machine on a level surface, engage the parking
brake, and lower the loader arms.
2. Shut off the engine and remove the key.
3. Clean the grease fittings with a rag.
4. Connect a grease gun to each fitting
41, and Figure 42).
Note: Raise the loader arms before greasing the
fittings in Figure 42.
Figure 40
(Figure 40, Figure
5. Pump grease into the fittings until grease begins to
6. Wipe up any excess grease.
g031219
g031219
29
Figure 41
Figure 42
ooze out of the bearings (approximately 3 pumps).
g004209
g029953