Product Overview; Controls - Toro TX 1000 Operator's Manual

Product Overview

1. Hood
2. Auxiliary hydraulic
couplers
3. Mount plate
4. Track
5. Loader arm
6. Lift cylinder
Figure 4
7. Tie-down/lift loop
8. Fuel gauge
9. Control panel
10. Auxiliary hydraulics lock
switch
11. Operator platform
12. Parking brake

Controls

Become familiar with all the controls
start the engine and operate the traction unit.
Control Panel
1. Message display
2. Power socket
3. Reference bar
g031208
4. Plug
5. Auxiliary hydraulics lever
Key Switch
The key switch, used to start and shut off the engine, has
3 positions: O , R
FF
Engine (page 20).
Throttle Lever
Move the control forward to increase the engine speed and
rearward to decrease speed.
Reference Bar
When driving the traction unit, use the reference bar as
a handle and a leverage point for controlling the traction
control and the auxiliary-hydraulics lever. To ensure smooth,
controlled operation, do not take both hands off the reference
g031209
bar while operating the machine.
13
(Figure
Figure 5
6. Throttle lever
7. Key switch
8. Traction control
9. Loader-arm/attachment-tilt
lever
10. Loader lock
, and S . Refer to Starting the
UN TART
5) before you
g205233