Lubrication; Greasing The Machine - Toro TX 1000 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease.
1. Park the machine on a level surface, engage the
parking brake, and lower the loader arms.
2. Shut off the engine and remove the key.
3. Clean the grease fittings with a rag.
4. Connect a grease gun to each fitting
Figure 39, and Figure
Note:
Raise the loader arms before greasing
the fittings in Figure
Figure 38
(Figure
40).
40.
g031219
38,
5. Pump grease into the fittings until grease begins
to ooze out of the bearings (approximately 3
pumps).
6. Wipe up any excess grease.
g031219
28
Figure 39
Figure 40
g004209
g029953