Message Display - Toro TX 1000 Operator's Manual

Auxiliary-Hydraulics-Lock Switch
Use your right foot to press the auxiliary-hydraulics-lock
switch to lock the auxiliary-hydraulics lever in the F
or R position and free your hand for other controls
EARWARD
(Figure 5).
Figure 14
1. Auxiliary-hydraulics-lock
Parking-Brake Lever
•
To engage the parking brake, rotate the lever to left
(Figure 15).
Note: The traction unit may roll slightly before the
brakes engage in the drive sprocket.
•
To release the brake, rotate the brake lever to the right.
Note: You may need to adjust the traction control to
release the brake pins and rotate the lever.
Figure 15
Fuel Gauge
This gauge measures the amount of fuel in the fuel tank(s).

Message Display

Engine-Coolant-Temperature Light
ORWARD
If the engine coolant becomes too hot, the light on the left
flashes and the horn sounds
disengage the auxiliary hydraulics and let the machine run at
high idle to allow the cooling system to cool the machine.
Check the coolant level when the engine has fully cooled.
Important: Do not shut off the engine, as this may
cause the machine to overheat.
g205234
Engine-Oil-Pressure Light
If the engine-oil-pressure becomes too low, the light on the
left illuminates steadily
the engine immediately and check the oil level. If it is low, add
oil and look for possible leaks.
Glow-Plug Light
The light on the right flashes while the glow plugs are charged
and warming the engine
g030721
16
(Figure 16). If this happens,
Figure 16
(Figure 17). If this happens, shut off
Figure 17
(Figure 18).
Figure 18
g029666
g029665
g029668