Toro TX 1000 Operator's Manual page 15

Loader Arm/Attachment-Tilt Lever
•
To tilt the attachment forward, slowly move the lever to
the right (Figure 11).
•
To tilt the attachment rearward, slowly move the lever
to the left (Figure 11).
•
To lower the loader arms, slowly move the lever forward
(Figure 11).
•
To raise the loader arms, slowly move the lever rearward
(Figure 11).
•
To lower the loader arms to a detent (float) position, push
the lever fully forward
Note: This allows attachments such as the leveler and
the hydraulic blade to follow the contours of the ground
(i.e., float) when grading.
1. Detent (float) position
2. Lower the loader arms.
3. Raise the loader arms.
By moving the lever to an intermediate position (e.g.,
forward and left), you can move the loader arms and tilt the
attachment at the same time.
(Figure 11).
Figure 11
4. Tilt the attachment
rearward.
5. Tilt the attachment
forward.
Loader-Valve Lock
The loader-valve lock secures the loader arm/attachment-tilt
lever so that you cannot push it forward. This helps to
ensure that no one accidentally lowers the loader arms during
maintenance. Secure the loader arms with the lock anytime
you need to shut off the machine with the loader arms raised.
To set the lock, lift up on it so that it clears the hole in
the control panel and swing it to the left, in front of the
loader-arm lever, pushing it down into the locked position
(Figure 12).
1. Loader arm/attachment-tilt
lever
Loader-Control-Reference Bar
The loader-control-reference bar helps stabilize your hand
while operating the loader arm/attachment-tilt lever
g029293
4).
Auxiliary-Hydraulics Lever
•
To operate a hydraulic attachment in the forward
direction, move the auxiliary-hydraulics lever forward
(Figure 13).
•
To operate a hydraulic attachment in the reverse direction,
move the auxiliary-hydraulics lever rearward
Note: If you release the lever while in the F
R position, the lever automatically returns to the
EVERSE
N position
EUTRAL
1. Forward-flow hydraulics
2. Reverse-flow hydraulics
15
Figure 12
2. Loader-valve lock
(Figure 13).
Figure 13
3. Neutral
g029981
(Figure
(Figure 13).
or
ORWARD
g029294