HUAWEI RP100&RP200 Room Presence
Commissioning Guide
To configure the camera:
Step 1 Open Internet Explorer, enter the codec IP address in the address box, and log in to the web
interface. Choose Device Control > Camera Parameters adjustment
Step 2 Set Video resolution to 1080p 60Hz, as shown in
Figure 7-1 Video resolution
Step 3 Set 2A mode to Auto, as shown in
on the actual environment.
Figure 7-2 2A mode
If the actual environment is tough and the camera brightness and color fail to meet requirements,
set 2A mode to Manual and adjust the other parameter settings for a satisfying effect.
Issue 01 (2015-02-12)
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Camera Settings
Figure
7-1.
7-2. The camera then calculates the best effects based
7 Camera Settings
87