Tools - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide
Task
Powering devices on
Setting IP addresses
Installing devices
Placing devices
Connecting devices
System upgrade
Configuring system settings
Adjusting video quality

2.2 Tools

Table 2-2 Tools
Tool
Phillips screwdriver
Flat-head
screwdriver
Allen wrench
Diagonal pliers
Measuring tape
Issue 01 (2015-02-12)
Description
Power the devices on and
check whether they operate
properly.
Set IP addresses for relevant
devices.
Install the devices in the RP
system.
Place the devices according
to the guide diagram.
Connect the devices in the
specified order using
prepared cables.
Upgrade relevant devices.
Setting parameters according
to relevant chapters.
Configure video devices.
Illustration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Deployment Preparation
Remarks
Model and
Specifications
PH2
5 mm (1 pc)
6 mm (1 pc)
Length: ≥ 7.5 m
Function
Used to install
mechanical parts.
Used to secure cables
connected to the
codec.
Used to adjust
mechanical parts of
the display.
Used to cut cables
and cable ties.
8