Saving The Settings; Follow-Up Procedure - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide
Parameter
Server type
Transmission type

5.3.4 Saving the Settings

After you set the parameters listed in section
to 5.3.3 Setting GK and SIP
The TE40 will restart to enable the settings.
Figure 5-9 Saving the settings

5.3.5 Follow-up Procedure

After you complete the configuration wizard, you may need to set other parameters. For details,
see chapter 6 "System Settings."
Issue 01 (2015-02-12)
Value
OCS
TCP
Parameters, tap Save. In the displayed dialog box, tap Save again.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 TE40 Wi-Fi and Touch Panel Settings
Remarks
Set this parameter based on
the site requirements.
Set this parameter based on
the site requirements.
5.3.1 Setting Time and Time Zone Parameters
64