HUAWEI RP100&RP200 Room Presence
Commissioning Guide
3.4.3 Installing the RP100 HD Display
Before installing the RP100 HD display, remove the cables temporarily from the locations
marked with a red circle shown in
Figure 3-13 Locations from which cables must be removed temporarily
Step 1 Lay a soft cushion on the ground. Place the HD display on the cushion with its screen facing
down.
Step 2 Remove the four screws on the back of the HD display using a Phillips screwdriver.
Issue 01 (2015-02-12)
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
3-13. Keep the cables for later use.
3 Installation
25