Installation And Preparation - Huawei 9000 VCT V100R011 Administrator's Manual

HUAWEI 9000 HD Video Terminal
Administrator Guide
About This Chapter
This chapter describes the interfaces and installation procedures for the device.
1.1 Overview
Before using a video terminal, the available terminal models, specifications, and main functions
should be understood so that a terminal can be properly selected and used.
1.2 Positioning the Terminal
The terminal must be positioned correctly before use.
1.3 Interfaces on the Rear Panel
This section describes the interfaces on the rear panel and their functions to ensure that required
devices are connected to the terminal correctly.
1.4 Connecting Cables
This section describes how to set up an HD videoconferencing environment using a simple
configuration.
1.5 Using the 3G Network
You can communicate with others over a 3G network using a 3G data card in conjunction with
the terminal.
1.6 Powering On or Off the Terminal
After connecting all the required devices, connect the power supply and then power on the
terminal.
1.7 Entering and Coming out of the Sleep Mode
To reduce power consumption, the terminal can be configured to enter sleep mode after the
terminal has been in the idle state for a defined period of time.
Issue 09 (2012-09-03)
1

Installation and Preparation

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Installation and Preparation
1