Ipsend-Transmit Tcp/Udp Data; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
OK
AT^IPLISTEN=?
^IPLISTEN: ("TCP","UDP"),(1-65535),(0-5)
OK
AT^IPLISTEN="TCP",12000
OK
AT^IPLISTEN?
^IPLISTEN: "TCP",12000,2
OK
15.4 ^IPSEND–Transmit TCP/UDP Data

15.4.1 Command Syntax

Command
^IPSEND=<link_id>,<data>
^IPSEND=?

15.4.2 Description

This command is used to transmit subscriber data through an established connection.
During the execution command running, the command can be interrupted.

15.4.3 Defined Values

<link_id >: an integer, specifying the ID of an established connection. The value
ranges from 1 to 5.
<data>: specifies subscriber data, enclosed in double quotation marks, with a
maximum length of 1500 bytes.
Issue 04 (2013-01-28)
Possible Response(s)
<CR><LF>^IPSEND: <link_id><CR><LF>
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Internet Service Commands
199