Hs-Handshake Between Ms And Te; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
3.17 ^HS–Handshake Between MS and TE

3.17.1 Command Syntax

Command
^HS=<id>,<action>

3.17.2 Description

This command is used to shake hand between MS and TE.

3.17.3 Defined Values

<id>: 8 digits, used to recognize MS.
<action>: represent the action type of TE.
0: TE is living
1: TE is stopped
<protocol>:indicate the protocol state of the module.
0: Module is running at APP.
1: Module is running at BOOT.
<is_offline>:
0: Online
1: Offline (reserved, not supported currently)
2: LPM
<product_class>: product class
0: GSM/WCDMA
<product_id>: product id
6: MU509
<software_id>: reserved
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>^HS:<id>,<protocol>,<is_offline>,<product_c
lass>,<product_id>,[<software_id>]<CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Commands
40