Nwinfo-Query Network Information; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
14.7 ^NWINFO–Query Network Information

14.7.1 Command Syntax

Command
^NWINFO

14.7.2 Description

This command is used to query the registered network information of the wireless
module in the normal state, includes serving cell information, neighbour cells
information of the active set, base station ID, frequency and so on.

14.7.3 Defined Values

<srv_band>: information of frequency the wireless module registered.
43 (SYS_BAND_GSM_850)
44 (SYS_BAND_GSM_EGSM_900)
45 (SYS_BAND_GSM_PGSM_900)
47 (SYS_BAND_GSM_DCS_1800)
48 (SYS_BAND_GSM_PCS_1900)
80 (SYS_BAND_WCDMA_I_IMT_2000)
87 (SYS_BAND_WCDMA_VIII_900)
<srv_nodeB_PLMN> and <srv_nodeB_BS>: information of base station the wireless
module maintained.
0–255: Base station ID.
Note:
<srv_cell_stat>: serving cell state.
0: Indicates not register on serving cell currently.
1: Indicates register on serving cell currently.
<srv_psc>: serving cell primary scrambling code.
0–65535: Serving cell primary scrambling code.
Issue 04 (2013-01-28)
It only supports to query base station information at GSM mode now, and returns 0,0 at
WCDMA mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible response(s)
<CR><LF>^NWINFO:<srv_band>,<srv_nodeB_PLMN>,<
srv_nodeB_BS>,<srv_cell_stat >,<srv_psc>,<ecio>,<rscp
>,<lac>,<cell_id>,<neighbor_cell_num>,<neig_psc1>,<nei
g_psc2>,<neig_psc3>,<neig_psc4>,<neig_psc5>,<neig_p
sc6><CR><LF><CR><LF>OK<CR><LF>
GSM 850
Extended GSM 900
Primary GSM 900
GSM DCS systems
GSM PCS
WCDMA IMT 2000
WCDMA 900
Network Service Commands
192