Huawei MU509 At Command Interface Specification page 5

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Summary
Keywords: UMTS, Module, WCDMA, GPRS, GSM
Abstract: This document describes the AT command interface between TE and MS of
Huawei UMTS Module. The interface can implement the functions such as SMS,
phonebook service, internet service, GPRS service and network setting.
This document includes:
Chapter
1 Scope
2 Interface Introduction
3 Configuration Commands
4 Identification Commands
5 Serial Interface Control
Commands
6 Short Message Service
Commands
7 Security Commands
8 GPRS Service Commands
9 Call Control Commands
10 Supplementary Service
Commands
11 Audio Commands
12 Phonebook Commands
13 Status Control Commands
14 Network Service
Commands
15 Internet Service
Commands
16 Overall Design Constraints Describes overall design constraints
17 Appendixes
Issue 04 (2013-01-28)
Details
Describes interface design principles and change
principles
Describes interface simply
Describes AT command of configuration
Describes AT command of identification
Describes AT command of serial interface control
Describes AT command of short message service
Describes AT command of security
Describes AT command of GPRS service
Describes AT command of call control
Describes AT command of supplementary services
Describes AT command of voice control
Describes AT command of phonebook
Describes AT command of status control
Describes AT command of network service
Describes AT command of internet service
Appendixes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
About This Document
5