Defined Values; Cpin-Manage Pin (Indicate Remaining Password Input Times); Command Syntax - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
When using the SET command, if the no PIN input request exists currently, an error
message "+CME ERROR" will be returned.
Note:

7.3.3 Defined Values

<pin>, <newpin>: string. Legal characters only include „0‟–„9‟.
<code>: string (without quotation marks)
READY: MT without password input request
SIM PIN: UICC/SIM PIN password request
SIM PUK: UICC/SIM PUK password request, to unblock the SIM PIN which was
blocked for 3 verification failure.
SIM PIN2: PIN2 password request
SIM PUK2: PUK2 password request, to unblock the SIM PIN2 which was blocked for
3 verification failure.
7.4 ^CPIN–Manage PIN (Indicate Remaining Password
Input Times)

7.4.1 Command Syntax

Command
^CPIN=<pin>[,<newpin>]
^CPIN?
^CPIN=?
Issue 04 (2013-01-28)
Verifying PIN or PUK during an emergency call may make the call disconnected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>^CPIN:
<code>[,<times>],<puk_times>,<pin_times>,<puk2_ti
mes>,<pin2_times><CR><LF>
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>OK<CR><LF>
Security Commands
108