Csdh-Show Sms Text Mode Parameters; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
6.19 +CSDH–Show SMS TEXT Mode Parameters

6.19.1 Command Syntax

Command
+CSDH[=<show>] <CR><LF>OK<CR><LF>
+CSDH?
+CSDH=?

6.19.2 Description

The SET command is used to control whether the header details are shown in the
TEXT mode return code. (It is only effective when the current mode is TEXT mode.)
The READ command is used to return the current status.
The TEST command is used to list the supported values.

6.19.3 Defined Values

<show>:
0: Not show the header details in the return code (default value).
1: Show the header details in the return code.
6.20 +CMSS–Send Message from Storage
6.20.1 Command Syntax
Command
+CMSS=<index>[,<da>
[,<toda>]]
Issue 04 (2013-01-28)
Possible response(s)
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+CSDH:
<show><CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CSDH: (list of supported
<show>s)<CR><LF><CR><LF>OK<CR><LF>
Possible response(s)
If TEXT mode (+CMGF=1) and sending successful:
<CR><LF>+CMSS: <mr>[,<scts>]<CR><LF>
<CR><LF>OK<CR><LF>
If pdu mode (+CMGF=0) and sending successful:
<CR><LF>+CMSS: <mr>[,<ackpdu>]<CR><LF>
<CR><LF>OK<CR><LF>
If sending fails:
<CR><LF>+CMS ERROR: <err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Short Message Service Commands
102