Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
If ME does not get acknowledgement within required time (network timeout), ME
should send RP-ERROR to network, and should shall automatically disable routing to
TE by setting both <mt> and <ds> values of +CNMI to zero.
To make the MS report the message notification again, you need to set <mt> and
<ds> again.
If the command is executed but no message is available for confirmation, the "+CMS
ERROR: <err>" will be returned
The TEST command returns the supported <n> values. If only 0 is supported, it
indicates that the command does not support TPDU sending.

6.9.3 Defined Values

<n>:
0: This option is not supported currently.
1: If the sending is successful, acknowledge with "RP-ACK (or receiving buffered
result code successfully).
2: If the sending is unsuccessful, acknowledge with "RP-ERROR".
<ackpdu> description:
Table 6-4 Basic elements
Abbr.
TP-MTI
TP-UDHI TP-User-Data-Header-Indication O
TP-PI
TP-PID
TP-DCS
TP-UDL
TP-UD
Notes:
Issue 04 (2013-01-28)
Reference
TP-Message Type Indicator
TP-Parameter-Indicator
TP-Protocol-Identifier
TP-Data-Coding-Scheme
TP-User-Data-Length
TP-User-Data
 1) Whether it is mandatory or optional: Mandatory (M) or Optional (O).
2) Indicates: Integer (I), Bit (b), 2 bits (2b), octet (o).

 3) Depends on TP-DCS.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Short Message Service Commands
Description
P1) P2)
M 2b TP-message type
Indicate that TP-UD has
b
a header
M o Indicate which optional
parameters exist
O o Protocol ID
O o Data coding scheme
O o User data length
O 3) User data
76