How Can I Delete A Device Failing In Communication Or Restart The Ecc500 - Huawei ECC500 User Manual

ECC500
User Manual
Figure 7-20 Resetting a fan
----End
7.17 How Can I Delete a Device Failing in Communication
or Restart the ECC500?
Prerequisites


Context

Before deleting a device failing in communication, ensure that the device contains no other
devices that need to be monitored.

Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Monitoring > System Equipment > Running Control.
Issue 04 (2019-12-20)
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
If there is no need to use or monitor a device, power off the device or disconnect the
device from the ECC500 and then delete the device failing in communication on the
ECC500. After the device is deleted, the device will not report any alarm to the ECC500.
After a monitoring reset is performed, the ECC500 restarts.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
84