Adding A Networked Device - Huawei ECC500 User Manual

ECC500
User Manual
Device
If the SNMP network management system is deployed or the WebUI needs to be used in the
long term, deploy a firewall in front of the ECC500 collector.
It is recommended that you log in to the ECC500 WebUI using Internet Explorer 8.0,
FireFox32.0, and Chrome37.0.2062.103 m in Windows 7, and using FireFox32.0 in Windows
XP.
Set the TLS1.1 and TLS1.2 protocols for the browser. Use Internet Explorer 8 as an example.
Open the Internet Explorer, choose Tools > Internet Options, click the Advanced tab, and
select Use TLS1.1 and Use TLS1.2.

5.2.2 Adding a Networked Device

Prerequisites




Context
Networked devices, such as ATMs, are devices with the same IP attributes in an equipment
room or site. By adding a networked device, you connect the device to the ECC500 in the
same network so that the ECC500 monitors the device status. If the networked device is
offline, the ECC500 will report a disconnection alarm on its WebUI.
Issue 04 (2019-12-20)
Parameter
LUI password
A networked device is connected to the ECC500 over a switch. The device and ECC500
have been powered on.
You have obtained the IP address of the networked device.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
Copyright © Huawei Technologies Co., Ltd.
Value
Preset value: 000001
5 UI Description
Remarks
commissioning and
maintenance.
To ensure access
security, change the
password upon first
login. For details,
see 7.6 How Can I
Change the ECC500
LUI Password?.
Remember the new
password because it
is necessary for
ECC500
commissioning and
maintenance.
40