Huawei ECC500 User Manual page 36

ECC500
User Manual
Procedure
Step 1 Use a floating nut mounting bar to install floating nuts (one on each site) into the mounting
holes in the posts of the rack, as shown in
Figure 4-2 Installing a floating nut
Step 2 Place the ECC500 on the correct guide rails in the cabinet.
Step 3 Secure the ECC500 in the cabinet by tightening the M6 screws clockwise on the right and left
mounting ears, as shown by (2) in
Figure 4-3 Installing the ECC500
----End
Issue 04 (2019-12-20)
Ensure that the floating nuts on both sides are on the same horizontal line.
Copyright © Huawei Technologies Co., Ltd.
Figure 4-2.
Figure 4-3.
4 Installation and Commissioning
29