Toro MMX-650E-S Operator's Manual page 5

•
Use only accessories and attachments approved
by the manufacturer.
•
Wear personal protective equipment and
appropriate clothing including:
– Hard hat
– Respirator or dust mask
– Face shield
– Safety glasses
– Hearing protection
– Safety shoes
– Long pants
– Shirt with long sleeves that are tight at the
wrists
– Tight-fitting gloves without drawstrings or loose
cuffs
•
Secure long hair, loose clothing, or jewelry that
may get tangled in moving parts.
•
Operating the equipment safely requires the full
attention of the operator. Do not wear radio or
music headphones while operating the machine.
•
Ensure that the machine is on a level surface
before operating the machine.
•
Chock the tires of the machine to prevent
unintended movement.
•
Before every use:
– Inspect the coupler, ball, and hitch.
– Ensure that all lights are functioning properly (if
the machine is equipped with a light kit).
– Ensure that the tires are properly inflated as
recommended.
– Ensure that the lug nuts are tight and torqued
properly.
– Ensure that the machine is properly secured.
Operation
•
Never run the machine in a poorly ventilated
or enclosed area without proper respiratory
protection. Dust from materials being mixed can
be very harmful to operators and bystanders.
•
Only operate the machine in good lighting
conditions.
•
Before starting the machine, make sure that there
are no persons or obstacles near or under the
machine.
•
Never leave a running machine unattended.
Always stop the motor and verify that all moving
parts have stopped.
•
Chock the tires when using the machine.
•
When not using the machine, chock the tires or
keep it attached to the tow vehicle.
•
Keep hands away from any moving parts. Keep
feet away from the tires and the front post.
•
Do not operate the machine outdoors in the rain.
•
Do not operate the machine under the influence
of alcohol or drugs.
•
Ensure that the area is clear of other people or
pets before operating the machine. Stop the
machine if anyone enters the area.
•
Never place your hands or any solid object into the
drum when the machine is in operation.
•
Do not touch parts which may be hot from
operation. Allow them to cool before attempting to
maintain, adjust, or service the machine.
•
Never move the machine while the motor is
running.
•
Keep the cowl closed and latched during operation.
•
Ensure that all the guards and shields are securely
in place before operating the machine.
•
Ensure that the O
position before connecting the machine to the
electrical source.
•
If the mixing paddles strike a foreign object or if
the machine should start making an unusual noise
or vibration, stop the motor and empty the drum.
Wait for all moving parts to come to a complete
stop and cool. Vibration is generally a warning of
trouble. Inspect for clogging or damage. Clean
and repair and/or replace damaged parts.
•
Lightning can cause severe injury or death. If you
see lightning or hear thunder in the area, do not
operate the machine; seek shelter.
5
/O switch is in the O
N FF FF