Mixing The Material - Toro MMX-650E-S Operator's Manual

Important:
Ensure that the paddles do not turn
when the clutch lever is in the O
Use the clutch lever to control the power transmission
to the paddles of the machine.
position.
FF
22
Using the Clutch Lever
Move the clutch lever clockwise to engage the clutch,
and counterclockwise to disengage the clutch
26).
Figure 26
1. O position
FF

Mixing the Material

DANGER
Eye and skin contact with concrete materials
and breathing the dust involved is hazardous
to your health.
• Ensure that there is adequate air
ventilation.
• Wear a dust mask to prevent inhalation of
dust while using the machine; refer to
Operating Practices (page
• Avoid direct contact of cement and
concrete materials with skin and eyes.
DANGER
Contact with the mixing paddles could cause
damage or injury.
Never put your hands inside the drum at any
time.
Important:
Do not add more material than
the batch capacity of the machine; refer to
Specifications (page
2. O position
N
3).
12).
(Figure
g019873
Safe