Table of Contents
Advertisement
Note:
Follow the manufacturer's instructions that are
printed on the packaging of the product you are using.
Mixing a Batch of Material in the
Machine
1.
Ensure that there is no old, loose material in
the drum that can contaminate the batch of
material; refer to
and
Dumping the Drum (page
the drum to the upright position.
Note:
Ensure that the drum is in the mix
position (upright) and the drum latch is engaged.
2.
Move the clutch lever to the O
to
Controlling the Paddles (page
3.
Start the motor; refer to
21).
4.
Move the clutch lever to the O
Controlling the Paddles (page
5.
Add the ingredients for the batch as follows:
A.
Pour water into the drum through the grating
of the drum guard.
B.
Add the plaster, cement, or other binding
material.
Note:
You can open bags of cement,
plaster, and binding materials by lowering
the bag onto the bag splitter
C.
If you are using sand and/or other
reinforcing materials, add them into the
drum.
6.
Allow the paddles to mix the material until the
ingredients have a uniform appearance.
Note:
If needed, add water or plaster, cement,
or other binding material until the consistency
of the batch is correct.
23
Cleaning the Drum (page 24)
24), then return
position; refer
FF
21).
Starting the Motor (page
position; refer to
N
21).
(Figure
Figure 27
27).
g021179
Advertisement
Table of Contents
