Figure - Toro CM-658H-S Operator's Manual

It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
Because in some areas there are local, state, or
federal regulations requiring that a spark arrester be
used on the engine of this machine, a spark arrester
is available as an option. If you require a spark
arrester, contact your Authorized Toro Service Dealer.
Genuine Toro spark arresters are approved by the
USDA Forestry Service.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
The DOT tire information is located on the side of
each tire. This information gives load and speed
ratings. Replacement tires should have the same
or better ratings; refer to
37) to ensure that the tires on your machine meet or
exceed the weight requirements of your machine.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Inspecting the Tires (page
Introduction
This machine is designed to mix concrete, plaster,
fireproofing material, grout, and other small-grained
concrete products. You can tow the machine behind a
vehicle equipped with a hitch appropriate for the type
of tow pole your machine has (ball, pintle, or pin hitch).
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product
and

Figure 2

identify the location of the model and
serial numbers on the product. Write the numbers in
the space provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
Side-Dump Models
1. Model and serial number location
2
ready.Figure 1
Figure 1
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g241810