•
Do not touch parts which may be hot from
operation. Allow them to cool before attempting to
maintain, adjust, or service the machine.
•
Never move the machine while the engine is
running.
•
Keep the cowl closed and latched during operation.
•
Ensure that all the guards and shields are securely
in place before operating the machine.
•
If the mixing paddles strike a foreign object or if the
machine should start making an unusual noise or
vibration, shut off the engine and empty the drum.
Wait for all moving parts to come to a complete
stop and cool. Vibration is generally a warning of
trouble. Inspect for clogging or damage. Clean
and repair and/or replace damaged parts.
•
Do not change the engine governor setting or
overspeed the engine.
•
Lightning can cause severe injury or death. If you
see lightning or hear thunder in the area, do not
operate the machine; seek shelter.
Maintenance and Storage
•
Before performing maintenance, do the following:
– Park the machine on a level surface.
– Shut off the engine. Wait for all movement to
stop and remove the spark plug wire before
adjusting, cleaning, or repairing.
– Allow the engine to cool before performing
maintenance or storing.
– Disengage all power and operation controls
before making any repairs.
•
Never lubricate, service, repair, or adjust the
machine while it is running.
•
Keep equipment materials clear from the muffler
and engine to help prevent fires. Wipe up any
spilled oil or fuel.
•
Never allow untrained personnel to service the
machine.
•
Keep your hands, feet, and clothing away from
moving parts. If possible, do not make adjustments
with the engine running.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Remove any buildup of grease, oil, or debris from
the machine.
•
Stop the machine, shut off the engine, and inspect
the machine if a foreign object enters the drum or
causes another obstruction. Make any necessary
repairs before starting the machine.
•
Do not tamper with safety devices.
•
Secure the machine from movement and chock
the tires when storing the machine.
•
Keep all nuts, bolts, screws, and hose clamps
securely tightened. Keep the machine in good
condition.
•
Use only genuine Toro replacement parts to
ensure that the original standards are maintained.
6